A beautiful velvet waist bag is not only convenient, but also fashionable! The practicality of a stylish accessory is obvious, everything you need is in maximum accessibility, while your hands remain free.
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami.jpeg)
Sew such a waist bag is not difficult.
You will need:
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-2.jpeg)
✂ velvet and cotton fabric;
✂ zipper 32 cm long;
✂ a piece of genuine or artificial leather;
✂ cushioning materials dekovil; volumenfliz P120 / P140 (both Freudenberg);
✂ thread for sewing (Gütermann);
✂ tailor pins;
✂ manual needle for sewing;
✂ centimeter tape;
✂ scale ruler;
✂ ruler for patchwork;
✂ trick marker;
✂ tailor's chalk;
✂ carpentry glue;
✂ safety pin;
✂ scissors;
✂ clothespin;
✂ slanting inlay;
✂ holster button
Waist bags - how to choose and what to wear: 15 options
Step 1
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-4.jpeg)
Prepare the part of the bag, A (size 25x15 cm) and stitch pattern F.
Draw details:
In size 5 x 32 cm;
With a size of 2 x 32 cm;
D measuring 5 x 32 cm;
E measuring 6 x 16 cm.
On parts B, C, D, and E, mark the middle.
Step 2
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-5.jpeg)
Cut out the details from velvet with allowances of 1 cm: A - 2x, C - 2x, D - 1x.
Parts B and F are just templates. Uncover details E, see step 7.
Step 3
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-6.jpeg)
And (the front part of the bag) with the wrong side pin to volumenfliz. Volumeflyz cut along the part.
Step 4
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-7.jpeg)
To fix volumeflise, grind with the front part along the slices at a distance of 5 mm.
DIY quilted bag
Step 5
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-9.jpeg)
Pin the stitches pattern F from the front and sew the stitch according to the pattern. Flip the pattern and repeat the stitch in mirror image.
Step 6
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-10.jpeg)
Remove the pattern and repeat the stitch two times on one side and the other with an interval of 1 cm.
Step 7
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-11.jpeg)
Draw the loops of bag E on velvet and cut out with 2 cm allowances. Chip the part with cotton cloth with the front side to the front side.
Step 8
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-12.jpeg)
Lay a line along the drawn lines, leaving on one side an open seam section of approx. 5 cm for eversion.
How to sew a leather pyramid bag
Step 9
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-14.jpeg)
Cut the seam allowances to a width of 5 mm, cut corners obliquely. Unfasten the loops, straighten the corners.
Step 10
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-15.jpeg)
Pin the loops of the bag to the back of the bag (to the part A from velvet) and sew along the long sides.
Step 11
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-16.jpeg)
Pin the back of the bag to the cotton fabric with the wrong side to the wrong side and stitch it at a distance of 5 mm for fixing.
Step 12
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-17.jpeg)
Cut the cotton lining around the part.
DIY fur clutch
Step 13
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-19.jpeg)
Stitch the zipper to the edge between the two parts C, turning one longitudinal section on each part. In this case, template B should be used as a lining.
Step 14
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-20.jpeg)
From piece of cotton fabric, cut part C twice with allowances of 1 cm cuts. On each part, press one longitudinal section on the wrong side by 1 cm and sew manually on the wrong side of parts C with a zipper fastened. Align the outer sections for fixation with a stitch at a distance of 5 mm.
Step 15
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-21.jpeg)
Stitch part D with part B (= two parts C with a zipper, see steps 13-14) face to face at a distance of 1 cm into the ring.
Step 16
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-22.jpeg)
Cut part D from cotton fabric with 1 cm allowances. Iron the part allowances along short cuts on the seamy side and sew the seamy side manually on the seamy side of part D from velvet. Grind longitudinal sections to fix at a distance of 5 mm.
How to sew a leather clutch
Step 17
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-24.jpeg)
Pin the front and back parts of the bag to the ring with the zipper open, the front side to the front side and stitch at a distance of 1 cm.
Step 18
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-25.jpeg)
Overlap seam allowances with a slanting hem. To do this, pin the stitch and grind it to the edge.
Step 19
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-26.jpeg)
To loosen the belt, cut out a piece of leather with a size of 3 x 13 cm.The longitudinal sections are alternately unscrewed to the wrong side by 1 cm and glued.
Step 20
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-27.jpeg)
Stitch both long sides to the edge.
A simple clutch with sequins: a master class
Step 21
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-29.jpeg)
Fold the ends of the leather tape and grind it to the edge to make a belt loops.
Step 22
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-30.jpeg)
From the dekovil, cut out a part for a belt 3.5 cm wide of the desired length (here 100 cm), iron to the skin and cut the belt out of the leather with allowances for cuts 1 cm wide.
Step 23
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-31.jpeg)
Put a belt on a piece of leather with the wrong side to the wrong side and sew along the perimeter to the edge.
Step 24
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-32.jpeg)
Carefully cut off protruding skin.
Step 25
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-33.jpeg)
At one end of the finished belt, use hole punching pliers to make holes with an arbitrary interval.
Step 26
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-34.jpeg)
Carefully cut holes in the belt with scissors for approx. 1-2 mm (the size of the holster button).
Step 27
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-35.jpeg)
Put on the belt loops (see step 21) on the belt. At the other end of the belt, punch a hole for the fastener and screw the holster button into it.
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-36.jpeg)
![](http://img.ballardsicecream.com/img/burd-2020/3896/sumka-napoyas-izbarhata-svoimi-rukami-37.jpeg)
Done!